SHAIRAD SANAT
SHAIRAD SANAT
SHAIRAD SANAT
اینورتر سری ATV61 اشنایدر الکتریک به منظور کنترل دور موتور آسنکرون از سرعت صفر تا سرعت نامی در توان های 0/75 تا 630 کیلووات مورد استفاده قرار می گیرد. کاربرد اصلی ATV61 جهت راه اندازی پمپ و فن (گشتاور متغیر) در صنایع مختلف می باشد. این مدل از کنترل دور (در بعضی توان ها) می تواند با و بدون صفحه گرافیکی و چوک ارائه گردد. از جمله مزایای ATV61، استفاده از یک اینورتر جهت راه اندازی چندین موتور می باشد و کاربرد اصلی آن جهت تثبیت فشار است. پروتکل ارتباطی Modbus و CANopen به صورت پیش فرض بر روی آن قرار داشته و تمامی حفاظت های جریانی، ولتاژی، حرارتی و ... را شامل می شود.
| Main | Detail |
|---|---|
| Type | ATV61 |
| Product Specific Application | Pumping and Ventilation Machine |
| Product Destination | Asynchronous & Synchronous Motors |
| Relative Humidity | 5 to 95 % |
| Storage Temperature | -25 to 70 ˚C |
| Operation Temperature | -10 to 45 °C (without) 45 to 60 °C (with derating factor) |
| Altitude | Up to 1000 m |
| Protection level | IP20 |
| EMC Filter | Integrated Level 3 EMC filter |
| Type of Cooling | Heatsink or water-cooled system |
| Supply Frequency | 50 to 60 Hz, +/-5 % |
| Output Frequency | 0.1 to 500 Hz |
| Switching Frequency | 2 to 8 kHz Adjustable |
| Voltage | 200 to 690 V, -15 to 10 % |
| Power | 0.75 to 630 kW |
| Asynchronous Motor Control Profile | Sensorless flux vector control Voltage/frequency ratio (2 or 5 points) Energy saving ratio |
| Synchronous Motor Control Profile | Vector control without speed feedback |
| Communication Port Protocol | Modbus CANopen |
| Protection Type | Against exceeding limit speed drive Against input phase loss drive Break on the control circuit drive Input phase breaks drive Line supply overvoltage drive Line supply undervoltage drive Overcurrent between output phases and earth drive Overheating protection drive Overvoltages on the DC bus drive Power removal drive Short-circuit between motor phases drive Thermal protection drive Motor phase break motor Power removal motor Thermal protection motor |
| Analogue Input Number and Type | 2 AI1-/Al1+ bipolar differential voltage +/- 10 V DC 24 V max 11 bits + sign AI2 software-configurable current 0...20 mA 242 Ohm 11 bits AI2 software-configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits |
| Discrete Input Number and Type | 6 Programmable LI1...LI5) 24 V DC <= 30 V)level 1 PLC - 3500 Ohm Switch-configurable LI6) 24 V DC <= 30 V)level 1 PLC - 3500 Ohm Switch-configurable PTC probe LI6)0…6 - 1500 Ohm Safety input PWR) 24 V DC <= 30 V) - 1500 Ohm |
| Analogue Output Number and Type | 1 AO1 software-configurable current 0...20 mA 500 Ohm 10 bits AO1 software-configurable voltage 0...10 V DC 470 Ohm 10 bits AO1 software-configurable logic output 10 V, 20 mA |
| Relay Output Number and Type | 2 Configurable relay logic R1A, R1B, R1C) NO/NC - 100000 cycles Configurable relay logic R2A, R2B) NO - 100000 cycles |
| Sampling Duration | 2 ms +/- 0.5 ms AI1-/Al1+) - analog input 2 ms +/- 0.5 ms Al2) - analog input 2 ms +/- 0.5 ms AO1) - analog output 2 ms +/- 0.5 ms LI1...LI5) - discrete input 2 ms +/- 0.5 ms LI6) if configured as logic input - discrete input |
| Option Modules | Communication card APOGEE FLN Communication card BACnet Communication card CC-Link Controller inside programmable card Communication card DeviceNet Communication card Ethernet/IP Communication card Fipio I/O extension card Communication card Interbus-S Communication card LonWorks Communication card METASYS N2 Communication card Modbus Plus Communication card Modbus TCP Communication card Modbus/Uni-Telway Multi-pump card Communication card Profibus DP Communication card Profibus DP V1 |
| Standards | IEC 60721-3-3 class 3C2 EN 61800-3 environments 2 category C3 EN/IEC 61800-5-1 EN 61800-3 environments 1 category C3 EN 55011 class A group 2 UL Type 1 EN/IEC 61800-3 |
COMPARE ITEMS
Compare
